Embossing Machine

　　1) The display screen:

　　Its role is whether the series resonance in the middle of the shock and steel mold is suitable. Rotating sound wave adjustments can change the read value. Generally adjust to 50 below.

　　2) current meter:

　　The current is the current. During the full load, expressing the resonance in series and the system software in the full load. Generally, everything is normal to be 0.4 to 0.6A, which vary from the power size. When the load is loaded, it is determined by pressing the total area and the complicated of the flower wheel and the size.

　　3) Output power output:

　　Adjust the power size and adjust to a different document position. The readings of the current will change.

　　4) Lower mode rate:

　　Adjust the speed of the flower wheel. The larger the large number is accelerating, the rate is getting faster and faster; the opposite rate decreases.

　　5) Modeling rate:

　　Adjust the steel mold speed ratio. The larger the number is accelerating; the opposite rate is reduced.

　　6) Manual/control switch:

　　Enter the automatic gear, the flower wheels and steel molds are automatically run automatically; enter the manual power switch, the operation of the flower wheel and steel mold is manipulated by the foot of the right leg. During the work, loosen the flower wheel and steel mold to terminate and run.

Read recommendations:

Automatic High-frequency Slide Table Machine Shoe Material Embossing Fusion cutting Machine

Automatic rotary table high frequency welding machine with card loading and take out robot

rotary spin melting welding machine

TPU welding machine equipment.Features of embossing machine products

The application of ultrasonic cutting machine