HF welder price.Here are the specific steps and precautions for embossing!

　　1、 Preparation work:

　　1. Check if the equipment is operating properly;

　　2. Check if the power supply is properly connected;

　　3. Check if the voltage matches the machine;

　　4. Choose different models of embossing machines based on different fabrics;

　　5. Prepare corresponding auxiliary tools.

　　2、 Start working:

　　1. Turn on the switch;

　　2. Adjust the pressure to the appropriate position (usually 8-10 kilograms per square centimeter);

　　3. Set the time (usually set to 15-20 seconds);

　　4. Start working.

　　3、 Notes:

　　1) Before starting up, be sure to firmly plug in the power cord;

　　2) If any abnormal noise or severe vibration is found in the machine, it should be stopped immediately;

　　3) After each work, unplug the machine;

　　4) Do not touch the metal parts of the machine with your hands to avoid burns;

　　5) Regularly clean the dust on the machine.

Read recommendations:

Double head neck reeling machine

double sides head HF radio frequency welding machine

Automatic HF RF welding machine PET plastic blister packaging sealing cutting edge

Cross-flow Wind fan blade balance machine

Car footmat welding